Need help?Do you have a question about the Taski AERO 3500 micro and is the answer not in the manual?
Explains the purpose of the technical manual and training concept.
Details the target audience and objectives of the technical training sessions.
Defines the technical manual's purpose and audience.
Concludes the foreword section, emphasizing the value of the training and manual.
Outlines general safety precautions for operating and maintaining the machine.
Explains Electrostatic Discharge (ESD) and its potential damage to electronic devices.
Provides general information including legend, part reference, and direction description.
Lists necessary tools and materials for maintenance.
Details the SKU, description, version, and series of the machine.
Provides detailed technical specifications like profile, speed, dimensions, and components.
Specifies transportation, cleaning, and reverse speeds.
Lists dimensions, weights, and pressure values.
Details battery compartment and specifications.
Provides technical specifications for the charger.
Lists specifications for the brush system and motors.
Details vacuum motor performance, air flow, and vacuum levels.
Lists additional specifications like HEPA filtration and hose length.
Lists available accessories and additional parts for the machine.
Details components and procedures for the upper part and tank.
Covers removal and mounting procedures for the recovery tank.
Procedures for removing and mounting the driver seat and its cover.
Covers procedures for the front hood, steering, and wheels.
Procedures for removing and mounting pedal components like springs and switches.
Procedures for removing and mounting the tool lowering unit and its parts.
Covers removal and mounting of drive unit components like wheels, encoders, and brakes.
Procedures for removing and mounting the front cover.
Procedures for removing and mounting the brush drive, belt, and motor.
Explains the machine's electrical system, overview, start-up, and emergency loop.
Procedures for removing, mounting, and connecting the dashboard.
Procedures for removing, mounting, and connecting the electronic control unit.
Procedures for removing, mounting, and connecting the battery charger.
Explains Hall effect and procedures for steering angle and throttle sensors.
Procedures for removing and mounting the main relay.
Procedures for removing and mounting the drive relay.
Overview of error codes, their causes, and troubleshooting steps.
Diagrams for battery connections and overall electrical schematics.
General section for additional information.
Information on how to find available GTS newsletters and instructions.
Details the revision history of the manual.
Alphabetical list of terms and their page references.
To Next Page
General