GTS Technical Manual
9. April 2021 Edition: V1.00/2021 5-1
Copyright © 2020, Diversey
05.20.18 upper part, tank - tank cover - 3500µicro_V1.00.fm
5.1 Upper part, tank
5.1.1 Removing of tank cover
Picture 1: Tank cover
• Remove all accessories and disconnect the hoses from the tank
cover (4134109).
• Open the tank cover.
• Loosen the screw (4122639) at the lower side of the tank cover
(4134109).
• Remove the tilt support cord (4134313).
• Close the tank cover.
• Remove the two hinge bolts (4132661).
• Remove the tank cover (4134109).
• According to what you need to exchange, remove the existing
parts from the tank cover and place it on the new one.
To Next Page
Loading...
Need help?
General