Taski AERO 3500 micro - Required material

GTS Technical Manual
9. April 2021 Edition: V1.00/2021 3-3
Copyright © 2020, Diversey
03.1 TASKI - general_V1.40.fm
3.2 Required material
3.2.1 Tools
• A standard range of tools is required e.g.
• Set of fork spanners.
• Set of Allen keys.
• Set of Torx keys.
• Set of pliers.
• Set of circlip pliers.
• Backing out punch set.
• Rubber and steel hammer.
• Set of screwdrivers (flat and Phillips).
• Socket set.
• Torque wrench 0-25Nm.
• Scissor jack.
3.2.2 Material
• No special tools are required.
The above listings are only a recommendation for the technical
training or working on the machine.