Taski AERO 3500 micro - Mounting of Drive Unit

GTS Technical Manual
9. April 2021 Edition: V1.00/2021 5-53
Copyright © 2020, Diversey
05.32.23 drive unit - drive unit - 3500µicro_V1.00.fm
5.7 Drive unit
5.7.8 Mounting of drive unit
Picture 78: Drive unit compl
• Position the drive unit and slide it into the chassis.
• Position and mount the 4 hexagon screws for the drive unit to
the chassis on the LH side.
• Position and mount the 4 hexagon screws for the drive unit to
the chassis on the RH side.
Picture 79: Mounting drive unit
• Connect the connector for the brake.
• Connect the wires of the drive unit to the connection block.
• Mount the rotary encoder according to the chapter MOUNTING
OF ENCODER.
• Mount the drive wheel according to chapter MOUNTING OF
DRIVE WHEEL.