GTS Technical Manual
9. April 2021 Edition: V1.00/2021 6-12
Copyright © 2020, Diversey
06.18.19 electronics - 2100µicro_3500µicro_V2.00.fm
6.3 Electronics
6.3.2 Mounting of electronics
Picture 11: Electronics unit
• Position the electronics onto the electrical support.
• Position and tighten the 4 screws.
• Connect the wires and the connections to the electronics.
Tighten the connectors with the correct torque. Refer to adjustment
and TASKI spares.
• Complete assembling according to chapter MOUNTING OF
DRIVER SEAT COVER (refer to “Mechanical” section).
Adjustment
• M5 with 6 Nm
• GND
• drive, brush, vac - (minus)
• M6 with 8 Nm
• +24V
• drive, brush, vac + (plus)
To Next Page
Loading...
Need help?
General