Taski AERO 3500 micro - Removing of Brush Motor

GTS Technical Manual
9. April 2021 Edition: V1.00/2021 5-69
Copyright © 2020, Diversey
05.68.61 brush drive - brush motor - 3500µicro_V1.00.fm
5.9 Brush drive
5.9.7 Removing of brush motor
Picture 101: Brush motor
Remarks
To get better access to the brush motor, remove the brush from the
machines.
• Remove the brush drive according to chapter REMOVING OF
BRUSH DRIVE.
• Remove brush belt according to chapter REMOVING OF BRUSH
BELT.
• Remove the 3 fixation nuts (4007270) and washers (4031330) of
the brush motor (4130739).
Picture 102: Fixation brush motor
• Remove the brush motor (4130739).