Taski Swingo 150 - Troubleshooting Guide; Common Malfunctions and Solutions

30
Malfunctions
Technical data
Accessories
Dimensions of the machine
Dimensions in centimetres!
swingo 150
Malfunction Possible causes Troubleshooting page
Machine does not
run
Not turned on • Turn on 27
Power supply cord not
properly plugged into
the mains socket
• Check
Power supply cord
defect
• Call your service
partner
Motor not turning
• Call your service
partner
Main switch defect
• Call your service
partner
Brush roller does
not turn
The machine is not in
the working position
• Place the machine in
the working position
27
The motor turns, but
not the brush
• Drive defective
• Call your service
partner
Poor vacuum
performance
Motor protection filter
dirty
• Clean or replace the
motor ptotection filter
27
Suction hose not con-
nected
• Check
Name swingo 150
typ CO150.5 CO150.5C
Rated voltage 230V~ 120V~ DC
Frequency 50 60 Hz
Rated power 1100 1100 W
Machine weight 12.7 12.7 kg
Dimensions max. (L x B x H) (ready for
operation)
43x38x112 43x38x112 cm
Assessed sound level LPA according to
EN 60704-1
74 74 dB(A)
Electrical protection class II II
Article swingo 150
7516236 Brush roller medium black X
7516237 Brush roller hard red X
7516546 Squeegee set X
112
43
38