EasyManua.ls Logo

Taski Diversey swingo 755B Power

Taski Diversey swingo 755B Power
410 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
V012 / 12089-66 0420
*12089-66*

BG .2
CS .19
DA .35
DE .51
EN .68
ES .85
ET .102
FI ...118
FR .134
GR 151
HR .168
HU .184
IT ...200
LT ..216
LV .232
NL .248
NO 264
PL .280
PT .296
RO 313
SK .329
SL .345
SV .361
TR .377
ZH .393


Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Taski Diversey swingo 755B Power and is the answer not in the manual?

Taski Diversey swingo 755B Power Specifications

General IconGeneral
Modelswingo 755B Power
Power SupplyBattery
Working Width43 cm
Solution Tank40 L
Recovery Tank40 L
Nominal Voltage24 V
Battery AutonomyUp to 2.5 hours
Brush Speed165 rpm
Productivity Rate1720 m²/h
Voltage24 V

Summary

Technical Compliance

Applicable EU Directives

Lists relevant EU directives for the machine's compliance.

Harmonised Standards

Lists standards to which the machine conforms for safety and EMC.

Machine Dimensions

Model Dimensions Overview

Illustrates physical dimensions for swingo 755B, 855B, 955B, and 1255B models.

Safety and Intended Use

Intended Use

Specifies the machine's intended commercial applications and limitations.

General Safety Warnings

Highlights critical safety instructions and potential hazards for safe operation.

Operator Training Requirement

Stipulates that only trained persons are allowed to operate the machine.

Safety Precautions and Product Information

Machine Operation Safety

Details safety rules for machine stopping, parking, and work on the machine.

Environmental and Handling Precautions

Covers safe operating environment and handling of batteries and cleaning solutions.

Cleaning Product Recommendations

Advises using only TASKI cleaning products for optimal results and to prevent damage.

Machine Components and Layout

Structural Layout Overview

Diagrams illustrating the physical arrangement of machine parts with numerical labels.

Component Identification

Lists and describes key components of the machine based on numerical references.

Battery Management

Permissible Battery Types

Specifies the types of batteries required and recommended for the machine.

Battery Handling Safety

Provides essential safety measures for handling and charging batteries.

Battery Connection Diagrams

Illustrates how to connect batteries for specific machine models.

Lithium Battery Charging

Lithium Battery Charging Advice

Offers guidance on charging Lithium batteries for optimal service life and performance.

Emergency Battery Disconnection

Instructs on how to disconnect the battery in emergency situations.

External Charger Connection

Details the process and precautions for connecting an external charger.

Charging and Battery Maintenance

On-board Charger Procedure

Describes the process for charging the machine using an optional on-board charger.

Wet-Cell Battery Care

Outlines maintenance procedures for wet-cell batteries.

Battery Compartment Access

Provides instructions on how to open and access the machine's battery compartment.

Pre-Commissioning Procedures

Machine Relocation and Brush Installation

Covers initial setup steps including moving the machine and installing brushes.

Squeegee Assembly and Water Tank Filling

Details how to assemble the squeegee and fill the fresh water tank.

Operation Start-up and Dosing

Dosing Chemical Products

Explains how to measure and add cleaning products for precise dosage.

Beginning Work Safely

Provides essential safety tips and procedures before starting machine operation.

Pre-Cleaning Surface Preparation

Instructs on preparing the cleaning surface by removing objects.

Cleaning Operations

Starting the Cleaning Process

Details the steps to start the machine and initiate the cleaning cycle.

Cleaning Methods and Solvent Replenishment

Explains direct/indirect methods and how to refill cleaning solvent.

Automatic Power-Off and Battery Status

Informs about the auto-off function and how to monitor battery capacity.

End of Operation Procedures

Ending Cleaning and Squeegee Maintenance

Covers stopping brushes, cleaning the squeegee, and draining water.

Tank Emptying and Cleaning

Provides instructions for emptying and cleaning the recovery and fresh water tanks.

Machine Cleaning and Storage

Brush and Tank Cleaning

Details how to clean brushes and the recovery/fresh water tanks.

Machine Cleaning and Storage Precautions

Covers general machine cleaning and safe storage practices.

Service and Maintenance

Maintenance Schedule and Intervals

Outlines recommended service intervals and general maintenance requirements.

Service Center Information

Directs users to contact service centers for assistance and information.

Blade Change Procedure

Details the steps for changing blades on 755B/855B models.

Blade Change for 955 B1255 B Models

Provides detailed instructions for changing blades on the 955B and 1255B models.

Troubleshooting Guide

Common Machine Malfunctions

Lists common issues like machine not functioning or brush not rotating.

Suction Performance Issues

Addresses problems with poor suction and wet floors.

Cleaning Solution Supply Problems

Covers issues related to insufficient or absent cleaning solution supply.

Technical Specifications

Machine Specifications Overview

Details working width, dimensions, weight, voltage, and power for all models.

Performance and Safety Data

Provides data on sound pressure, vibration, splash water guard, and protection class.

Accessories, Transport, and Disposal

Available Accessories

Lists compatible accessories for different swingo models with item numbers.

Transport and Disposal Guidelines

Covers safe transport procedures and proper disposal of the machine and batteries.

Company Contact Information

Diversey Country Contacts

Provides contact details for Diversey offices in multiple countries.

Related product manuals