71
Traction batteries are required for the use of this machine (no wet bat-
tery sets, starter or device batteries). We recommend the use of pure
traction batteries. Only these batteries guarantee a long service life.
Traction batteries are produced as closed and maintenance-free (VR-
LA) batteries (gel and AGM, Pure Lead and lithium). The machine
must be adjusted according to each construction type and manufac-
turer.
Each battery has a different service life and performance.
The machine and charger must be programmed after the batteries
have been inserted and when the battery type and/or the manufactur-
er have been changed, as well as prior to starting the machine.
Incorrect adjustment may result in early battery failure.
-
- Wear protective gloves for this purpose.
-
Installation and/or connection errors may result in se-
vere injury, explosion and major damage to the ma-
chine and the environment.
-
Batteries contain acid. Always wear safety goggles
for the maintenance, installation and removal of wet-
cell batteries.
Rinse acid splashes in your eyes or on your skin with
plenty of clear water. Then immediately consult a
doctor. Wash your clothes with water.
Charging batteries creates a dangerous gas mixture.
Keep away from open fire or glowing embers.
Do not smoke!
Danger of acid burns!
Attention! The battery poles are always energized.
Therefore do not deposit any objects on the batteries!
12 V 12 V
Battery
plug
Power Board
Drive direction
Forward
Charger
internal
Mains
red
black
Charger
external
12 V12 V12 V12 V
Battery
plug
Power Board
Drive direction
Forward
Charger
internal
Mains
red
black
Charger
external
Mains
To Next Page
Loading...
Need help?
General
