73
Malfunctions
Technical data
Malfunction Possible causes Troubleshooting Page
Machine without function
Machine is switched off
• Switch on the ON/OFF switch
68
No power supply
• Insert the plug into the mains sock-
et
68
Main cord defect • Replace the main cord
Defective ON/OFF switch • Contact your service partner
Motor does not turn • Contact your service partner
Foam or liquid leaking from the ma-
chine
Float malfunction
• Switch off ON/OFF switch.
• Check the float to make sure it is
fully functional and repair any fault
• Repair any fault
68
Floor remains wetSoiled water is not
vacuumed up
Tank full • Empty the tank 68
Fixomat squeegee not correctly ad-
justed
• Re-adjust Fixomat squeegee
• Replace the blade
68
Poor suction performance
Tank full • Empty the tank 68
Filter cloth soiled • Clean or replace the filter cloth 68
Filter disc dirty • Replace the filter disc 68
Hose or dust nozzle blocked
• Remove the blockage
68
Coarse filter soiled
• Clean or replace coarse filter
Fixomat squeegee not correctly ad-
justed
• Re-adjust Fixomat squeegee
• Replace the blade
Machine vacumat 12 vacumat 22 vacumat 22T
Rated voltage 220-240V~ 110-120V~ 220-240V~ 110-120V~ 220-240V~ 110-120V~ AC
Frequency 50-60 60 50-60 60 50-60 60 Hz
Rated power, nominal 1000 850 1000 850 1000 850 W
Dimensions (LxWxH) 39x44x55 39x44x55 39x44x65 39x44x65 90x70x98 90x70x98 Cm
Main cord length 10 10 10 10 10 10 m
Maximum weight of opera-
tional machine
10 10 10.5 10.5 19 19 Kg
Tub capacity wet/dry +/-
5%
12 / 18 12 / 18 22 / 28 22 / 28 22 / 28 22 / 28 L
EN
To Next Page
Loading...
