Why is my rice too soft in my Tatung TPC-6MDB?
If the rice is too soft when using your Tatung Electric Pressure Cooker, it's likely that too much water was added. Try reducing the water level in your next cooking cycle.
Why is my rice half cooked in Tatung Electric Pressure Cooker?
If the rice is coming out half-cooked or too hard in your Tatung Electric Pressure Cooker, it could be due to a couple of reasons. You may not have added enough water, so try adding more next time. Also, ensure you're not opening the cover too soon. After the cooking time is up, release the steam and wait 5 minutes before opening the cover.
What to do if my Tatung Electric Pressure Cooker is leaking from the cover?
If the Tatung Electric Pressure Cooker is leaking from the cover, it could be due to several reasons. First, ensure that the gasket is properly placed according to the requirements. If there's food debris on the gasket, clean it thoroughly. A worn gasket also causes leakage, so consider replacing it. Finally, make sure the cover is firmly closed; if not, close it again securely.
Why is it difficult to open the cover of my Tatung TPC-6MDB?
If you find it difficult to open the cover of your Tatung Electric Pressure Cooker, it might be because the float valve hasn't dropped after steam release. Try gently pressing the float valve with chopsticks. Alternatively, there might still be pressure inside the cooker. Wait until the pressure lowers down completely before attempting to open the cover.
What to do if Tatung TPC-6MDB Electric Pressure Cooker is leaking from float valve?
If the Tatung Electric Pressure Cooker is leaking from the float valve, it's possible that food debris is attached to the float valve gasket ring. Clean the float valve gasket to resolve this. If the gasket ring is worn, you should replace it.
What to do if all lamps flash on Tatung Electric Pressure Cooker?
If all the lamps are flashing on your Tatung Electric Pressure Cooker, and a 'C5' appears on the nixie tube, add water as required. If the temperature is too high because the inner pot is not placed correctly, put the inner pot properly. If 'C1' or 'C6' appears on the nixie tube, send it to the service agency for inspection.
Why is the float valve unable to rise on my Tatung Electric Pressure Cooker?
If the float valve on your Tatung Electric Pressure Cooker is unable to rise, it might be because there isn't enough food and water inside the pot. Make sure to put food and water according to the recommended guidelines. If there's a slight leak from the cover or exhaust valve, send the appliance to a service agency for inspection.
What to do if exhaustion from exhaust valve does not stop on Tatung Electric Pressure Cooker?
If the exhaustion from the exhaust valve on your Tatung Electric Pressure Cooker doesn't stop, ensure the exhaust valve is in the sealing position by sliding it accordingly. If the pressure control fails, send the unit to a service agency for maintenance.
Why is the lamp not bright after powering on my Tatung TPC-6MDB?
If the lamp isn't bright after powering on your Tatung Electric Pressure Cooker, inspect the socket to ensure there is proper contact.
General| Brand | Tatung |
|---|---|
| Model | TPC-6MDB |
| Category | Electric Pressure Cooker |
| Language | English |
To Next Page
