EasyManua.ls Logo

Taurus PTSI 2200 - Usage and Care Instructions; Before Use; Filling with Water; Operating the Iron

Taurus PTSI 2200
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- Connect the appliance to a base with an earth
socket withstanding a minimum of 16 amperes.
- The appliance’s plug must t into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
- Do not use or store the appliance outdoors.
- Never use the electric wire to lift up, carry or
unplug the appliance.
- Do not wrap the cable around the appliance.
- Ensure that the electric cable does not get
trapped or tangled.
- Do not allow the connection cable to hang or
to come into contact with the appliance’s hot
surfaces.
- Check the condition of the electrical connection
cable. Damaged or tangled cables increase the
risk of electric shock.
- As an additional protection to the electrical
supply for the appliance, it is advisable to have
a di󰀨erential current device with a maximum
sensitivity of 30mA. Ask for advice from a com-
petent installer.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not touch metal parts or the body when it is
operating, as it may cause serious burns.
USE AND CARE:
- Fully unroll the appliance’s power cable before
each use.
- Do not turn the appliance over while it is in use
or connected to the mains.
- To keep the non-stick treatment in good condi-
tion, do not use metal or pointed utensils on it.
- Respect the MAX level indicator (Fig. 1)
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional or industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Do not store or transport the appliance if it is
still hot.
- To ensure that the iron functions correctly, keep
the iron face smooth and do not hit it against
metallic objects (for example, the ironing board,
buttons, zips…)
- The use of distilled water is recommended,
especially if the water in your area contains
any type of grit or is “hard” (contains calcium or
magnesium).
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Never rest the appliance into a surface while in
use.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance with pets or animals.
- Do not use the appliance to dry textiles of any
kind.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched o󰀨 permanently.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturers liability null and void.
INSTRUCTIONS FOR USE
BEFORE USE:
- Remove the appliance’s protective lm.
- Some parts of the appliance have been lightly
greased. Consequently, the rst time the
appliance is used a light smoke may be detec-
ted.
- Prepare the appliance according to the function
you wish to use.
FILLING WITH WATER:
- It is essential to have lled the deposit with
water to be able to work with steam.
- Open the lid of the lling mouth.
- Fill the deposit taking care to observe the MAX
level (Fig. 1)
- Close the lid of the lling mouth.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Start the appliance by turning on the speed
regulator.
- The pilot light (D) comes on.
- Turn the thermostat control to the desired tem-

Related product manuals