Need help?Do you have a question about the TAWI VM60 and is the answer not in the manual?
Instructions for mounting and connecting the vacuum pump, ensuring proper air flow and electrical connections.
Steps for mounting an optional silencing hood around the vacuum pump for reduced sound emissions.
Guidance on mounting the filter unit and connecting air tubes between the pump, filter, and lift tube.
Instructions for shortening or changing the lift tube and mounting the top swivel and suction head.
Instructions for fitting the suction foot or quick change attachment and the touch bolt to the suction head.
Guidance on suspending the lift tube from a crane system or jib crane, ensuring free movement.
Procedures for balancing the unit with and without load for optimal operator control.
Requirements for a dynamic operational test after installation, performed by qualified technicians.
Steps to prepare and start the lifter, including pre-use inspections and safety checks.
Detailed instructions on how to operate the lifter to move and position loads, including grip and release.
Procedure for changing the suction foot using the quick change attachment for different load types.
Instructions for regular cleaning of the suction foot air filter to maintain performance.
Steps for cleaning the vacuum pump filter, including disassembly and reassembly.
Routine checks to be performed by the operator on a weekly basis for safety and functionality.
More thorough inspections to be conducted quarterly by in-house maintenance personnel.
Specialized inspections and updates required annually by authorized TAWI technicians.
General| Brand | TAWI |
|---|---|
| Model | VM60 |
| Category | Lifting Systems |
| Language | English |
To Next Page
