Need help?Do you have a question about the TAWI VM30 and is the answer not in the manual?
Instructions for mounting and connecting the vacuum pump, including power supply requirements.
Guidance on mounting the optional silencing hood around the vacuum pump for noise reduction.
Steps for mounting the filter unit and connecting air tubes between the pump, filter, and lift tube.
Procedure for shortening the lift tube and mounting the top swivel securely.
Steps to attach the suction head to the lift tube using tape and clamps.
Fitting the suction foot or quick-change attachment and the touch bolt to the suction head.
Suspending the lifter in a crane system and adjusting the load balance for operator comfort.
Procedure for performing a dynamic operational test and checking for damage after installation.
Pre-use checks, powering on, and verifying free movement of the lift unit for safe operation.
Operating the lifter to move, lower, lift, and release loads using the handle and suction foot.
Steps for changing suction feet using the quick-change attachment for different load types.
Regular cleaning of the suction foot air filter using compressed air.
Cleaning the vacuum pump filter inset and reassembling the filter unit correctly.
Information on required service frequency, safety precautions, and using original parts.
Details on weekly operator, quarterly inhouse, and yearly technician inspections to ensure safe operation.
Common problems, causes, and actions for lift failures, slow movement, and starting issues.
General| Brand | TAWI |
|---|---|
| Model | VM30 |
| Category | Lifting Systems |
| Language | English |
To Next Page
