Need help?Do you have a question about the TAWI VM80 and is the answer not in the manual?
Guidance on mounting and connecting the vacuum pump for optimal air flow and power supply.
Instructions for mounting the optional silencing hood around the vacuum pump for reduced noise emissions.
Steps for mounting the filter unit and connecting air tubes between the vacuum pump and lift tube.
Procedure for shortening or changing the lift tube, including mounting the top swivel.
Steps for attaching the suction head to the lift tube, ensuring proper connection and security.
Instructions for fitting the suction foot or quick change attachment and adjusting the touch bolt.
Steps for suspending the lift tube in a crane system or jib crane, ensuring free movement.
Procedure for balancing the unit with and without load for operator comfort and control.
Mandatory procedures for dynamic operational testing before putting the vacuum lifter into use.
Steps for performing pre-operation checks and turning on the lifter for use.
Instructions on how to operate the vacuum lifter, including gripping, lifting, moving, and releasing loads.
Daily checks performed by the operator to ensure safe and proper functioning of the lifter.
Regular checks performed by inhouse maintenance personnel for continued safe operation.
Annual service and inspection performed by certified TAWI technicians.
Identifies causes and actions for the vacuum lifter failing to lift loads, including air leaks.
Troubleshooting steps for slow vertical movement, including air leakage and filter issues.
Addresses issues with the operating handle position, typically related to load balance adjustment.
Solutions for the vacuum pump failing to start, covering circuit breakers, main switch, and PTC relays.
General| Brand | TAWI |
|---|---|
| Model | VM80 |
| Category | Lifting Systems |
| Language | English |
To Next Page
