Need help?Do you have a question about the Taylor 2752 and is the answer not in the manual?
Operating Environment| indoor temperature range | 32°F to 122°F (0°C to 50°C) |
|---|---|
| outdoor temperature range | 4°F to 140°F (-20°C to 60°C) |
| outdoor humidity range | 20% - 99% RH |
Wind Measurement| wind speed range (m/s) | 0 – 30 m/s |
|---|---|
| wind speed range (km/h) | 0 – 108 km/h |
| wind speed range (mph) | 0 – 67 mph |
Transmission and Channels| transmission distance | Max. 200 feet (60M) |
|---|---|
| transmission frequency | RF434 MHz |
| number of channels | 1 for Wind Gauge Sensor, max. 2 for remote sensors |
Resolution| temperature resolution | 0.1°F |
|---|---|
| humidity resolution | 1% |
Power| receiver unit power | 2 AA batteries |
|---|---|
| remote Wind Gauge sensor power | 2 AA batteries |
| battery type recommendation | lithium recommended |
Instructions for inserting batteries into the remote Wind Gauge Sensor.
Guidance on selecting an optimal outdoor location for the wind sensor.
Detailed steps for attaching the sensor unit to a mast.
Steps to take when the receiver loses connection with the remote sensor.
Guidelines for safe operation, cleaning, and environmental care of the units.
To Next Page
