4
1. Press the ON button to turn the scale on.
A memory number (P0-P3) will blink.
2. Press the (▲) or (▼) button to select a memory.
Press the SET button to confirm. The gender icon blinks.
3. Press the (▲) or (▼) button to toggle between the male and female icons.
Press SET button to confirm your gender. The age digits blink.
4. Press the (▲) or (▼) button to increase / decrease the age value.
Press SET button to confirm displayed age. The height digits blink.
5. Press the (▲) or (▼) button to increase / decrease the height value.
Press SET button to confirm displayed height.
Your personal data is now saved in memory
6. When the scale shows “0.0”, you may step on the scale for a measurement.
Otherwise, the scale will turn off automatically. Your data remains
saved in memory.
7. Repeat procedure for a second user.
(Done)
3
4
5
6
1
2
To Next Page
Loading...
Need help?
General
