Need help?Do you have a question about the Taylor THDC-954 and is the answer not in the manual?
Details the terms and conditions of the manufacturer's warranty for products.
Provides an overview of the manual's purpose, scope, and usage guidelines.
Outlines critical safety information and procedures for operators and personnel.
Emphasizes foundational safety principles and practices for machine operation.
Lists key safety rules to minimize risks during operation and maintenance.
Specifies the essential personal protective equipment (PPE) for safe operation.
Establishes procedures for safely isolating energy sources during maintenance.
Details the step-by-step process for implementing lock-out/tag-out protocols.
Illustrates and identifies the key components and their positions on the machine.
Guides on visually inspecting and adjusting drive belts for proper operation.
Procedures for cleaning the engine and checking mounting bolt torque.
Provides engine specs, and details on accelerator pedal calibration.
Explains engine diagnostic lights and lists fault codes with failure results.
Offers solutions for common engine problems encountered during operation.
Describes the main parts and operational flow of the fuel system.
Instructions for draining and changing fuel/water separator filters to maintain fuel quality.
Details air cleaner components and servicing procedures.
Provides guidance on diagnosing and resolving issues within the air intake system.
Explains the function and minimal maintenance required for the exhaust system.
Describes the cooling system's parts, operation, and coolant requirements.
Guides on checking coolant levels and performing system upkeep.
Introduces the 12-volt DC system and its major electrical parts.
Troubleshooting steps for alternators, circuit breakers, relays, and switches.
Explains indicator lights and troubleshooting for electrical faults.
To Next Page
General