Introduction
Introduction
TTX X / / TTXXH H / / TTXXB B 118800S S - - 440000L L ((44//0077)) IInnttrroo--11
This manual is to be used as a guide for lubrication and maintenance as well as general equipment care.This manual is to be used as a guide for lubrication and maintenance as well as general equipment care.
A separate section A separate section is provided to is provided to discuss each major component discuss each major component or system. or system. This method of preThis method of presentingsenting
the maintenance instructions enables Taylor Machine Works, Inc. to assemble a maintenance manual withthe maintenance instructions enables Taylor Machine Works, Inc. to assemble a maintenance manual with
explicit instructions on the exact equipment installed on the machine.explicit instructions on the exact equipment installed on the machine.
No single rule in the booklet No single rule in the booklet can be followed to tcan be followed to the exclusion of others. he exclusion of others. Each rule must be consEach rule must be considered inidered in
light of the other rules, the knowledge and training of the man (operator), the limitations of the machine,light of the other rules, the knowledge and training of the man (operator), the limitations of the machine,
and the workplace environment.and the workplace environment.
Warnings and cautions are included to reduce the probability of personal injury, when performing mainte-Warnings and cautions are included to reduce the probability of personal injury, when performing mainte-
nance procedures which if improperly performed nance procedures which if improperly performed could be potentially hazardous. could be potentially hazardous. Failure to comply withFailure to comply with
these warnings and cautions can result in serious injury and possible death.these warnings and cautions can result in serious injury and possible death.
All circumstances and conditions All circumstances and conditions under which service will under which service will be performed cannot be performed cannot be anticipated. be anticipated. Do notDo not
perform any service if you are unsure that it can perform any service if you are unsure that it can be done safely. be done safely. Contact your TContact your Taylor Dealer or Taylor Dealer or Tayloraylor
Machine Works, Inc. if you have questions about the proper service techniques.Machine Works, Inc. if you have questions about the proper service techniques.
Operating this powered industrial truck when it is in need of repair can result inOperating this powered industrial truck when it is in need of repair can result in
death or serious injury to the operator or other personnel or cause severe property damage.death or serious injury to the operator or other personnel or cause severe property damage.
Machine checksMachine checksmust be performed daily:must be performed daily:
11.. bbeeffoorreethe machine is placed in service,the machine is placed in service,
2.2. by qualiby qualified, tfied, trainedrained, and ski, and skilled perslled personnel whonnel who have propo have proper tools er tools and knowand knowledge, aledge, andnd
3.3. in accin accordancordance with e with the Opthe Operator’erator’s Guids Guide, Maine, Maintenanctenance Manuae Manual andl andSafety Check 2nd Edition booklet.Safety Check 2nd Edition booklet.
Maintenance ManualMaintenance Manual
!!
..
OperatorsOperators GuideGuide
!! ..
Regularly ScheduledRegularly Scheduledmaintenance, lubrication, and safety inspections will help ensure a safe andmaintenance, lubrication, and safety inspections will help ensure a safe and
productive work life for the machine and the operator(s).productive work life for the machine and the operator(s).
Do not operate the truck if it is iDo not operate the truck if it is in need of repairn need of repair. . Remove the ignition key andRemove the ignition key and
attach a “Lock-out” tag.attach a “Lock-out” tag.
Do not attempt to perform maintenance procedures unless you have beenDo not attempt to perform maintenance procedures unless you have been
thoroughly trained and you have the proper tools.thoroughly trained and you have the proper tools.
To Next Page
Loading...
