EasyManua.ls Logo

Taylor TX360L - Page 9

Taylor TX360L
320 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety-2
Safety-2
TX / TXH / TXB 180S - 400L (4/07)TX / TXH / TXB 180S - 400L (4/07)
12.12. Operating a lift truck Operating a lift truck which has been which has been modifiedmodified
without the without the manufacturer’s manufacturer’s approval. approval. ThisThis
includes the attachment, counterweight, tires,includes the attachment, counterweight, tires,
etc.etc.
13.13. Lifting people with Lifting people with a fork lift a fork lift not properlynot properly
equipped for elevating personnel.equipped for elevating personnel.
14.14. Improper maintenance Improper maintenance of lift of lift chains.chains.
15.15. Improperly blocking Improperly blocking and supporting and supporting mast,mast,
carriage, or attachment before repairing truck.carriage, or attachment before repairing truck.
16.16. Working in Working in an area not an area not properly vented forproperly vented for
toxic exhaust fumes.toxic exhaust fumes.
Maintenance / Service Personnel:Maintenance / Service Personnel:
1.1. Keep tKeep the trhe truck cuck clealean, frn, free of oiee of oil, grl, greasease, ane, andd
fuel.fuel.
2.2. Steam Steam clean clean / wa/ wash tsh the trhe truck uck prior prior to pto performerform--
ing mainting maintenance. enance. Wear Wear anti-slip footanti-slip footwearwear
when performing maintenance procedures.when performing maintenance procedures.
3.3. Use OUse OSHA aSHA apprpproveoved ladd ladderders and os and othether pror properper
cleaning accessories to access hard to reachcleaning accessories to access hard to reach
maintenance places.maintenance places.
4.4. Keep gKeep gratratingings fres free of ice of ice, die, dirt, art, and grand gravelvel..
5.5. RegulaRegularly rly inspeinspect ct and and replacreplace ane anti-slti-slip mip masticastic
on the vehicle as needed.on the vehicle as needed.
6.6. EnsEnsure alure all safl safety dety decaecals arls are in ple in place oace on then the
vehiclevehicle
..
Mounting and Dismounting:Mounting and Dismounting:
1.1. Face tFace the lifhe lift trut truck whck when geten getting ting on or on or off off the lithe liftft
truck.truck.
2.2. One hOne hand aand and twnd two feo feet or et or two two hanhands ads and onnd onee
foot must be in contact with the lift truck at allfoot must be in contact with the lift truck at all
times (3 point contact).times (3 point contact).
3.3. Use hUse handandrairails anls and othd other grer grab poab pointints.s.
 Serious falls and injuries canSerious falls and injuries can
result from improper mounting or result from improper mounting or dismountingdismounting
of the lift truck.of the lift truck.
 Serious falls or injuries canSerious falls or injuries can
result from being thrown from the lift truck!result from being thrown from the lift truck!
Never allow riders on the lift truck or load.Never allow riders on the lift truck or load.
Lift Truck Lock-out / Tag-out:Lift Truck Lock-out / Tag-out:
The engine should be locked-out / tagged-out toThe engine should be locked-out / tagged-out to
prevent it from being inadvertently started beforeprevent it from being inadvertently started before
performing maintperforming maintenance or enance or repairs. repairs. The batteryThe battery
should be locked-out / tagged-out to prevent acci-should be locked-out / tagged-out to prevent acci-
dental activation of the starter and possible start-dental activation of the starter and possible start-
ing of ing of the engine. the engine. Refer toRefer to Lock-Out / Tag-OutLock-Out / Tag-Out
ProcedureProcedurein the back of this section for the pro-in the back of this section for the pro-
cedures to be followed to perform lock-out / tag-cedures to be followed to perform lock-out / tag-
out.out.
 Do not start the engine if theDo not start the engine if the
ignition switch, or engine control panel hasignition switch, or engine control panel has
been locked-out / tagged-out by maintenancebeen locked-out / tagged-out by maintenance
personnel. personnel. Doing so Doing so can result can result in personalin personal
injury and / injury and / or damage to or damage to the equipment. the equipment. If inIf in
doubt, contact the doubt, contact the maintenance supervisormaintenance supervisor..
TICS Emergency Stop.TICS Emergency Stop. The The TICS TICS emergencyemergency
stop must be pulled to the out position to enablestop must be pulled to the out position to enable
the TICS controlled hydraulic functions of thethe TICS controlled hydraulic functions of the
truck. truck. Should a Should a TICS contTICS controlled operation rolled operation occuroccur
without an operator command, depress the TICSwithout an operator command, depress the TICS
emergency stop emergency stop to disable tto disable the function. he function. The TICSThe TICS
controlled functions that are disabled by the TICScontrolled functions that are disabled by the TICS
emergency stop include mast, carriage and at-emergency stop include mast, carriage and at-
tachment functionstachment functions. . Shut down the Shut down the truck as truck as soonsoon
as it is as it is safe to do safe to do so. so. Notify maintenance Notify maintenance person-person-
nel immediatelynel immediately. . Do not return Do not return the truck to the truck to serviceservice
until all faults have been corrected.until all faults have been corrected.
 When the TICS emergencyWhen the TICS emergency
stop is depressed, the TICS display and for-stop is depressed, the TICS display and for-
ward and ward and back-up alarms back-up alarms are disabled. are disabled. Addi-Addi-
tionally, the parking brake will be automaticallytionally, the parking brake will be automatically
applied.applied.
           

Proper Training:Proper Training:
1.1. TTaylor aylor MachiMachine Wne Works, orks, Inc. Inc. publispublishes Safhes Safetyety
Check 2nd Edition, TMW-072 a booklet citingCheck 2nd Edition, TMW-072 a booklet citing
some safety precautions to observe during liftsome safety precautions to observe during lift
truck operation. truck operation. One copy One copy is shipped is shipped withwith
each lift truck; additional copies are availableeach lift truck; additional copies are available
at a nominal fee from the authorized Taylorat a nominal fee from the authorized Taylor
dealer from which the equipment was initiallydealer from which the equipment was initially
purchased.purchased.
https://www.forkliftpdfmanuals.com/

Related product manuals