How to Set the Clock Manually
To manually set the clock:
Your WeatherGuide™ has a 12 hour
clock function.To set the clock:
1. Press and hold the “Set” button lo-
cated on the back of the base unit.
The hour digits will flash.
2. Press “+C/F” to change the hours.
Press “SET” to enter.
3. Press “+C/F” to change the minutes.
Press “SET” to enter.
4. Press “+C/F” to change the month.
Press “SET” to enter.
5. Press“+C/F” to change the day.Press
“SET” to enter.
6. Press “+C/F” to change the year.
Press “SET” to enter.
7. The clock is now set.
Tip: Hold down the “C/F” button to ad-
vance the digits quickly.
Press and hold SET to start
clock setting.
Press +C/F to change time digits
and then SET to enter.
Repeat for all settings.
Press SET after setting year.
The clock is set.
6
To Next Page
Loading...
