Continuation of radio setup
● Rx channel order - Determines the order
in which the four primary controls
(Rudder, Elevator, Aileron, and Throttle)
are inserted on channels 1-4 when
creating a new model
● Mode - Determines which sticks move
which controls on the airplane
● Invert Rotary - inverter the way the rotary
works when selecting stuff (not the general
menu navigation)
This is the place where switches can be used to trigger
special functions such as soundtrack playback, speech
output of variables etc.
● Global functions are special functions that are
applied across all planes.
To Next Page
Loading...
