TBS6902 Multi Standard Tuner Card User Guide
4.1 Reboot your computer and then enter the operating system webui, right click
to open “Terminal”, input the command “sudo-s” and Ubuntu default password;
finally you will get access to the operating system.
4.2 # lspci -vvv | grep 6902 (This command detects whether there is “Device 6902”,
displaying as the following webui.
）
4.3 Set up a directory named “tbsdriver”. Here takes saving the directory on the
desktop as an example.
# mkdir tbsdriver (See screenshot below.）
To Next Page
Loading...