Mode selection
The D•TWO has three Delay modes: Traditional, Straight and Rhythm.
Traditional mode
The standard setup used by any Delay unit, including the traditional feedback
strategy.
Straight mode
The D•TWO default mode, including the ability to control the exact number of
repeats.
Rhythm mode
A unique feature allowing you to tap a specific rhythm of your choice. The
D•TWO automatically enters the Rhythm mode when FEEDBACK/RHYTHM is
tapped.
Please note that the Mono/Stereo mode is selected in the Setup menu.
Connect the D•TWO as illustrated using balanced 1/4” jack cables.