TC Electronic D-TWO User Manual

12
THE D•TWO DISPLAY
MIDI
Activity
LED
PingPong
Indication
Feedback
Filter
Filter Edited
LED
Delay Time BPM/ms Subdivision
Dynamic Meter
Tempo
Indication
Text LineInput
Meters
Preset Number
Preset Bank
Indicator
Overload LEDs
DI 44.1/48 Icon
Indicates whether the D•TWO is locked to an
external clock or not. When locked to an
external clock either the 44.1 or 48 icon
displays the incoming Sample Rate.
If the clock is unacceptable or no clock is
available, the "DI" indicator will flash.
ms Icon
The ms icon is lit when the 4 digits show the
Delay time in milliseconds.
BPM Icon
The BPM icon is lit when the 4 digits show the
Delay time in “Beats per Minute”.
Feedback %
Indicates the amount of level fed back to the
Delay line, thus controlling the Decay of the
Delay repeats.
Feedback #
Indicates the number of repeats allowed. Unlike
the Feedback parameter in most other Delay
units this parameter lets you decide exactly
how many repeats you want.
The maximum number of controlled taps is 10.
FB Filter
Indicates the Feedback High Cut and Low Cut
filter setting. At times a too precise/clear Delay
can disturb the music instead of complementing
it. Try reducing the highs of the Delay by
adding a High Cut filter. This will simulate a
more analog/softer feeling.
Filter
Indicates the overall High Cut and Low Cut filter
setting.
PingPong
Indicates the currently selected type of panning.
The Ping Pong effect occurs when the Panning
Speed is synced to the Delay time.

TC Electronic D-TWO Specifications

General

Brand	TC Electronic
Model	D-TWO
Category	Recording Equipment
Language	English