TC Electronic G-MINOR User Manual

23
G•MINOR & G•FORCE
• On the G•Force, press I/O SETUP
and select the Control menu
• Scroll down in the parameter list and
find the “Effect Bypass” section as
illustrated
• Place the cursor at the effect block
you wish to bypass and press ENTER
to access “learn-mode”.
The display reads “LEARNING”
• Now press either the UP or the
DOWN switch on the G•Minor
• The G•Force has now recognized the
Control Change number sent by the
G•Minor and the number will appear
in the menu line (example: 83)
Tuner Mute
The G•Force Tuner can be shown in the G•Minor display.
• Connect MIDI Out on the G•Minor to MIDI In on the G•Force and MIDI Out
on the G•Force to MIDI in on the G•Minor
• Press and hold the G•Minor SQUARE switch for 1 second.
The Tuner is now activated. The G•Force can be set to mute the
Outputs in Tuner mode if desired. This is done in the menu appearing when
you press the TUNER on the g•Force front
• To release from Tuner mode press any key on the G•Minor
GATE NONE
CPR LEARNING
FIL NONE
PAN NONE
PIT NONE
DLY NONE
DRV NONE
CHO NONE
REV NONE
EFFECT BYPASS
GATE NONE
CPR MIDI CH 1 CONTRL. 83
EFFECT BYPASS

TC Electronic G-MINOR Specifications

General

Brand	TC Electronic
Model	G-MINOR
Category	Accessories
Language	English