TC Electronic G-MINOR User Manual

Setting Up
• Select the G•Minor pedal via the
G•Force I/O Setup - Control menu
• Set Bank Select to Coarse in
I/O Setup - MIDI menu
• Place Cursor at “LOAD INTO BANK” and press ENTER.
By choosing the G•Minor pedal as model the G•Force is automatically setup to
use the G•Minor default CC values for Tap Tempo and Tuner Mute.
• For recalling presets above 100; select bank size=100 in the I/O Setup-MIDI
menu. Then: Bank 1 = ROM 1-100 Bank 4 = User 1-100
Bank 2 = ROM 101-200 Bank 5 to 9 = Card 1 to 5; 1-100
Bank 3 = ROM 201-225
22
G•MINOR & G•FORCE
Specifically for operating the G•Minor with the G•Force
The functions described below requires G•Force software 2.04 or higher!
Please contact you local dealer or TC Electronic for information on how to
upgrade your current G•Force software if necessary.
MODEL G-MINOR
LOAD INTO BANK PRESS ENTER
BOARD FACTORY DEFAULTS
Bypassing Effect Blocks
The G•Force effect blocks can be switched on/off via a received Program
Change message or a Control Change value. In the following example we will
use the G•Minor Control Change mode to bypass G•Force effect blocks.
Example
• Connect MIDI Out from the G•Minor to MIDI In on the G•Force
• Select Control Change mode on the G•Minor by setting the select switch in
“up” position

TC Electronic G-MINOR Specifications

General

Brand	TC Electronic
Model	G-MINOR
Category	Accessories
Language	English