5454
To enter the Reset page:
Hold down one of the 3 Bypass keys pressed while
powering up the unit.
Move the marker using the the CURSOR keys and
press OK to select the desired Reset type.
Load User Default
This will reset all system parameters back to a Default setup
defined by you (see Store User Def below). This reset will NOT
delete the User presets of the M3000.
Store User Def
When you have a perfect setup of your M3000, you are able to
store this as your own Default setup. This function is very useful,
for example when you have finished a special production and
wish to return to normal setup. When you have the perfect setup
of your M3000, simply select this function and press OK to store
your Default settings.
Set User Name
This function makes it possible to write your Name and Phone
number into the M3000. Press OK to access the User data menu.
Use the ADJUST wheel and the CURSOR keys to write your
Name and Phone number into the M3000. Press OK to accept.
Your Name and Phone number will be displayed during
power-up.
Reset System Parameters
This will reset all system parameters back to the Factory Default.
This reset will NOT delete the User presets of the M3000.
Reset all presets
This will clear all RAM presets .
Store and load your own
default settings
Enter User Data page
Reset system parameters
Clear all user presets
Test Programs
Type your name here
Type your phone number
Place cursor here
and press OK to
finalize session.
APPENDIX - THE RESET PAGE
To Next Page
Loading...
Need help?
General
