Need help?Do you have a question about the TC Electronic Mimiq Doubler and is the answer not in the manual?
General| Best uses | Guitar |
|---|---|
| Product type | Expression pedal |
| Product color | Gray |
| DC-in jack | Yes |
| Power consumption | 100 mA |
| Power source type | DC |
Lists the items included in the TC ELECTRONIC effect pedal box.
Explains the concept of True Bypass and its impact on tone when the pedal is off.
Details how to connect power and audio cables for initial setup.
Describes the DC power input and USB port for firmware updates.
Explains how to use the footswitch to turn the effect on/off and the indicator LED.
Details the 1/4" TS jacks for connecting guitars and amplifiers.
Describes the function of the DUBS, TIGHTNESS, EFFECT, and DRY knobs.
Provides examples and advice on where to place the Mimiq in your signal chain.
Guides on how to adjust the pedal's controls for desired sound and output levels.
Explains the difference between True Bypass and Buffered Bypass modes.
Instructions on how to change the pedal's bypass mode using internal DIP switches.
Steps for downloading and installing firmware updates via USB.
Procedure for replacing the internal battery and notes on battery care.
To Next Page
