15
EN
TECHNICAL SPECIFICATIONS
Due to continuous development, these
specifications are subject to change
without notice.
Analog Inputs
Connectors:
Input Type:
Impedance:
Max. Input Level:
Analog Outputs
Connectors:
Max. Output Level:
Output Type:
Impedance:
Sense Input Impedance:
Overall Data
D to A Conversion:
A to A Delay:
Dynamic Range:
THD:
Frequency Response:
Crosstalk:
EMC
Complies with:
¼" phone jacks w. mono-sense
Single ended
1 MOhm
10 dBu @ 12V supply
¼" phone jacks w. mono-sense
10 dBu @ 12V supply
Balanced/Single ended w. ground sense
0 Ohm
225 Ohm
24 bit, 128 x oversampling bitstream
1.65 ms
106/98 dB, 20 Hz to 20 kHz
@ Input level 16/-2 dBu, not A-weighted
< -90 dB (0.0032 %) @ 1 kHz, I/O Level
16 dBu, Load > 2400 Ohm
+0.1/-0.2 dB, 20 Hz to 20 kHz
< -100 dB, 20 Hz to 7 kHz, < -94 dB,
7 kHz to 20 kHz
EN 55103-1 and EN 55103-2 FCC Part 15,
Class B, CISPR 22, Class B
Environment
Operating Temperature:
Storage Temperature:
Humidity:
General
Finish:
Dimensions:
Weight:
Mains Voltage:
Power Consumption:
Warranty
Parts and labor:
32° F to 122° F (0° C to 50° C)
-22° F to 167° F (-30° C to 70° C)
Max. 90 % non-condensing
Anodized aluminum front
Plated and painted steel end caps
130 x 130 x 55 mm
765 g
100 to 240 VAC, 50 to 60 Hz
(auto-select) AC wall adapter.
AC adapter supplies 12 VDC
minimum 0.3 A to pedal.
<5 W
1 year
To Next Page
Loading...
