TC Electronic Sentry Noise Gate User Manual

Setup
English manual 2015-09-28 12
Ready…
Your TC Electronic effect pedal box should con-
tain the following items:
►
Your TC Electronic effect pedal
►
1 USB cable (Type A to Mini-B)
►
1 TC Electronic sticker
►
1 leaflet about TC’s guitar FX product range
Inspect all items for signs of transit damage. In
the unlikely event of transit damage, inform the
carrier and supplier.
If damage has occurred, keep all packaging, as
it can be used as evidence of excessive handling
force.
Set…
►
Connect a 9V power supply with the follow-
ing symbol to the DC input socket of your TC
Electronic effect pedal.
This product does not come with a power
supply. We recommend using TC Electronic’s
PowerPlug 9 (sold separately).
If no power supply is available, you can run
this product using a battery. For more infor-
mation on changing batteries, see “Changing
the battery”.
►
Plug the power supply into a power outlet.
►
Connect your instrument to the in jack on the
right side of the pedal using a ¼“ jack cable.
►
Connect the out jack on the left side of the
pedal to your amplifier using a ¼“ jack cable.
►
You may want to place noisy effect pedals
(such as distortion pedals) in Sentry Noise
Gate’s Send/Return loop. For more informa-
tion, see “Send and Return jacks”.
Play!

TC Electronic Sentry Noise Gate Specifications

General

Brand	TC Electronic
Model	Sentry Noise Gate
Category	Music Pedal
Language	English