Need help?Do you have a question about the TC Electronic Spark and is the answer not in the manual?
General| Technology | Analog |
|---|---|
| Bypass | True Bypass |
| Input Impedance | 1 MΩ |
| Inputs | 1 x 1/4" Instrument |
| Outputs | 1 x 1/4" Instrument |
| Controls | Gain, Level, Tone |
| Power Source | 9V DC |
Advises against exposure to dripping, splashing, or placing liquids on the equipment.
States that all servicing must be performed by qualified personnel.
Warns that unauthorized modifications void operating authority.
Explains compliance with FCC rules and measures to correct interference.
Details apparatus compliance for Canadian customers with ICES-003.
Introduces the PrimeTime feature for flexible footswitch operation.
Outlines initial setup steps: checking contents, connecting power and audio.
Specifies the DC power input requirements, including voltage and current.
Details the 1/4" mono jacks for instrument input and amplifier output.
Explains the Level knob for boost amount and footswitch functions (On/Off, PrimeTime).
Advises positioning the booster after drive pedals for increased volume.
Recommends placing the booster before drive pedals for enhanced gain and sustain.
Suggests continuous use to improve amp tone by driving it harder.
Illustrates a typical pedalboard setup for using Spark Mini Booster as a volume booster.
Illustrates a typical pedalboard setup for using Spark Mini Booster as a gain booster.
Illustrates connecting Spark Mini Booster within an amplifier's FX loop.
Provides the input (1 MΩ) and output (100 Ω) impedance values.
Confirms the Spark Mini Booster features a 100% analog signal path.
Guides on placing the pedal before the amp or in the FX loop for desired sound.
Clarifies unbalanced I/Os using standard TS instrument cables.
Lists maximum setting, bypass mode, signal circuitry, and dimensions.
Details input/output connector types and power input specifications.
Summarizes Level Knob and Footswitch operations, including PrimeTime.
To Next Page