Need help?Do you have a question about the TC Electronic BH800 and is the answer not in the manual?
General| Amplifier Type | Solid State |
|---|---|
| Number of Channels | 1 |
| Power Output | 800W |
| Effects | TonePrint |
| MIDI | No |
| Effects Loop | Yes |
| Impedance | 4 Ohms |
| Speaker Impedance | 4/8 Ohms |
| EQ | 4-band EQ |
| Inputs | 1 x Instrument (1/4") |
| Outputs | 1 x speakON |
Covers numbered safety instructions for device usage and handling.
Details electrical safety, warnings about voltage, and grounding requirements.
Provides step-by-step instructions for connecting and powering the amplifier.
Details the input jack for bass connection and the gain knob with CLIP LED for input gain setting.
Describes the advanced EQ section for tone shaping and contouring.
Covers the TonePrint slots, switch, knobs, and how to control effects.
Explains the mute switch for silent tuning and the master level knob for overall output.
Details the MAINS IN connector, power switch, and voltage compatibility.
Describes the speakON connector for cabinet connection and minimum impedance.
To Next Page
