Setup
Spark Mini Booster English Manual Version 2.1 5
Setup
Ready…
The Spark Mini Booster box should contain the
following items:
– 1 Spark Mini Booster pedal
– 2 rubber feet for “non-velcro” pedalboard
mounting
– 1 TC Electronic sticker
– 1 leaflet about TC’s guitar FX product range.
Inspect all items for signs of transit damage. In
the unlikely event of transit damage, inform the
carrier and supplier.
If damage has occurred, keep all packaging as it
can be used as evidence of excessive handling
force.
Set…
– Connect a 9V power supply with the following
symbol to the DC input socket of Spark Mini
Booster.
! Spark Mini Booster does not come with a
power supply.
– Plug the power supply into a power outlet.
! Please note that Spark Mini Booster has no
battery compartment. A conventional power
supply is required for operating this product.
– Connect your instrument to the INPUT jack
on the right side of the pedal using a ¼“ jack
cable.
– Connect the OUTPUT jack on the left side of
the pedal to your amplifier using a ¼“ jack ca-
ble.
Play!
To Next Page
Loading...
Need help?
General
