TC Electronic T2 Reverb User Manual

Frequently asked questions
T2 Reverb English manual 2014-09-20 21
Frequently asked questions
about TonePrint pedals
“Are TonePrint pedals analog or digital?”
The dry signal of your guitar passes straight
through this effect pedal and is in no way digi-
tized. The “wet” signal is just added.
“Do the TonePrint pedals have balanced
or unbalanced inputs/outputs?”
TonePrint pedals have unbalanced inputs and
outputs. Use cables with TS jacks (i.e., standard
instrument cables).
“Is it possible to run this TonePrint pedal
in the effects loop of a tube amp?”
Yes. All TonePrint pedals have a very wide gain
range and are designed to run at both instru-
ment and line level. There are a few amps which
are capable of running much hotter than regu-
lar +4dBu line-level signals because of the way
their effect loops are designed. With these amps,
it might be possible to get the input to clip. But
for 99 % of all amps, the TonePrint pedals will
work just fine.
For additional information about your TC Elec-
tronic TonePrint effect pedal, please go to TC
Electronic Support:
tcelectronic.com/support/

TC Electronic T2 Reverb Specifications

General

Brand	TC Electronic
Model	T2 Reverb
Category	Music Pedal
Language	English