TC Electronic TRaNSITION - Bypass Modes and Kill-Dry

13
Bypass modes and Kill-Dry on/off
Unscrew the back-plate and look for the two small dip-switches in the upper left corner.
Theupperdip-switch(closesttotheDC9Vinconnection),switchesbetweenTrueBypassmode
(default) and Buffered Bypass mode.
True Bypass
Buffered Bypass Kill-Dry - off Kill-Dry - on
True Bypass – is a hard-wire bypass that gives absolutely no coloration of tone when the pedal
isbypassed.UsingTrueBypassonallpedalsisaperfectchoiceinsetupswithafewpedalsand
relatively short cables before and after the pedals.