Need help?Do you have a question about the TC-Helicon MIC MECHANIC 2 and is the answer not in the manual?
General| Type | Effects pedal |
|---|---|
| Proper use | Concert/Studio |
| Beat effects | Echo |
| Compatibility | TC HELICON MP-75, MP-76, Sennheiser e835 FX |
| Product color | Beige, Red |
| Main out | 1 |
| Power consumption (typical) | 6 W |
Weight and Dimensions| Depth | 60 mm |
|---|---|
| Width | 90 mm |
| Height | 140 mm |
| Weight | 420 g |
Selects echo type and amount.
Selects reverb type and amount.
Accepts micro-USB cables for firmware updates.
Controls the power state of the device.
Adjusts the amount of pitch correction.
Engages 'Adaptive Tone' for EQ and processing.
Bypasses effects and enters Tap Mode.
Connect to a mixer or powered speaker.
Connect your microphone.
Connects power supply or AA batteries.
Provides essential safety guidelines for battery handling, replacement, and disposal.
Confirms compliance with FCC Part 15 rules for Class B digital devices.
Warns against unauthorized modifications affecting FCC compliance.
Declares product conformity with various EU directives and regulations.
To Next Page
