Need help?Do you have a question about the TC-Helicon Voicelive play GTX and is the answer not in the manual?
General| Type | Vocal and guitar effects processor |
|---|---|
| Effects Types | Harmony, Delay, Reverb, Doubling |
| Guitar Effects | Distortion, Delay, Reverb |
| Inputs | 1 x XLR (Mic), 1 x 1/4" (Instrument) |
| MIDI I/O | In/Out |
| USB | Yes |
| Display | LCD |
Adjusts the microphone input gain level and monitors with an LED indicator.
Explains the elements displayed on the device's LCD screen.
Details the functions of the UP/DOWN and HIT/TALK footswitches.
Explains the context-sensitive soft buttons around the LCD.
Selects the type of microphone (Dynamic, Condenser, MP-75).
Configures onboard microphones for ambient sound or key detection.
Adjusts the guitar input gain level for optimal signal.
Assigns functions (HIT, TALK, PRESET UP, LOOP) to the mic button.
Applies EQ, compression, and gating to the vocal signal.
Controls the amount of auto-chromatic pitch correction applied.
Configures stereo, mono, or dual mono XLR output signal routing.
Delays the lead vocal to sync with effects like harmonies.
Sets a global key for harmony/pitch correction, overriding preset settings.
Determines the audio source recorded into the loop.
Sets the MIDI channel for receiving note information.
Sets the MIDI channel for receiving CC control information.
Turns individual effect blocks ON, OFF, or assigns to HIT button.
Sets the musical key for harmony generation (Auto or manual).
Sets the musical scale associated with the chosen key.
Shifts the input note up or down by semi-tones.
Selects from 11 amplifier styles (Acoustic, Clean, Crunch).
Replicates the amplifier's drive control for distortion.
Adjusts amplifier volume without adding distortion.
Selects from 41 factory-designed guitar styles.
Controls the overall output level of the VoiceLive Play GTX.
Provides advice for creating seamless loops and using undo.
Troubleshooting steps for no audio output or signal issues.
Guidance for resolving harmony effect problems like incorrect sound.
Troubleshooting steps when effects are not producing audible changes.
Instructions for restoring the device to its original factory presets.
Steps to perform a full factory reset, erasing all custom settings.
To Next Page