15
Global Key – Sets the key to be used with harmony generation and/or pitch correc-
tion.
There are two settings:
1. OFF – Key can be set per individual preset, via direct key setting (C, D, F# etc.), INST In
(Guitar/Keyboard) via NaturalPlay, Room Sense, MIDI or Aux.
2. ON – When a key is chosen within a preset, that key will remain when the preset is changed.
Global Tempo – Sets globally applied tap tempo.
There are two settings:
1. OFF – Tap tempo set within a preset changes from preset to preset.
2. ON – Tap tempo set within a preset will maintain that setting when the preset is changed.
Global Guitar FX – Controls the way guitar effects are applied to presets.
There are two settings:
1. OFF – Guitar effects are set per-preset.
2. ON – Guitar effects set within a preset will maintain that setting when the preset is changed.
This setting is especially useful to acoustic guitar players, who may want to nd a “sound” that
works for their guitar and then stick with it for all songs.
Guitar Gate – Sets the gate threshold for guitar input.
Guitars have varying amounts of “noise” inherent in their signal. Sometimes it’s desireable to set a gate
to “cut off” or “mute” the guitar when the incoming signal is very low. We’ve set the threshold pretty
low by default, but you may want to raise it to suit your style. Having a higher gate threshold can be
effective when playing quick chords with rests in between.
Setup - System cont.
To Next Page
Loading...
Need help?
General
