TC-Helicon PERFORM-VK User Manual

6 PERFORM-VK User Manual
Turning Eects On and O
To activate or deactivate an eect, simply tap the Reverb, Harmony or Echo
button. The button will glow GREEN when active and WHITE when inactive.
Editing Eects
Don’t like the Reverb, Harmony or Echo that you hear? You can adjust both the
Level (volume) and Style (sound of the eect) to dial in just the right combination
for your music.
To edit an eect, simply PRESS & HOLD the eect button. You’ll know you’re in
EDIT mode because the LED ring surrounding the Control Knob will illuminate and
the eect button will pulse.
The LED ring serves as both a Level and Style control. As you turn the knob, the
LED segments will ll up, indicating that you’re turning up the Level of the
current style. When you completely ll the LED ring, the color will change, letting
you know that you’ve now changed the Style of the eect. Continuing to turn the
Control Knob will increase the Level of that Style.
Each eect has four dierent styles to choose from. Three of the styles are
available “out of the box” and one is reserved for a Beamed preset Style
(described next).
Reverb
• Room
• Club
• Hall
• Beamed preset Style
Harmony
• High
• Higher
• Low
• Lower
• High & Low
• High & Higher
• Higher & Lower
• Low & Lower
• Notes natural (spaced greens)
• Notes tight* (close greens)
• 8 channel natural (spaced rainbow)
• 8 channel tight* (close rainbow)
*The “tight” modes have humanization turned way down
Echo
• ¼ Note
• ⁄ Note
• Slap
• Beamed preset Style
Saving Changes
Any changes you make to an eect are stored in real time. There are no extra
steps to take.
Preset
A preset is a “complete sound” created by a combination of eects.
You’ll notice that the active eects change between Preset 1 and Preset 2 in the
images above. Presets can be congured however you like. The state (on/o),
style and level for each eect in a preset can also be dierent from preset
to preset.

TC-Helicon PERFORM-VK Specifications

General

Sample Rate	48 kHz
Bit Depth	24-bit
Effects	Reverb, Delay
Inputs	1 x XLR (mic)
USB	Yes
Phantom Power	+48V (switchable)