15 Brewing coffee
1. Heating up the machine
Press the On/Off switch to switch the machine on.
If the machine is in standby mode (see “Standby
mode”), press a coffee selection button or move the
lever.
The three coffee selection buttons will flash as the
machine heats up. The machine loses pressure as it heats
up.
A little residual water may also escape from the coffee
spout at the same time.
If the right indicator light flashes (a signal will also
sound) fill the tank with water.
2. Positioning the cup
Place a cup beneath the coffee spout.
3. Insert a capsule and push the lever down
Push the lever back as far as it will go and insert a
capsule as illustrated with the lid facing forwards.
The capsule must be intact: do not pierce it and do not
remove the capsule lid or insert a misshapen capsule!
Push the lever fully down.
This action pierces the base and lid of the capsule.
m
m
m
m
Brewing coffee
=
To Next Page
Loading...
