TCL 10 Pro

56
To enable data roaming
• Touch Settings > Network & internet > Cellular network > Data
roaming.
• Turn on
.
• When data roaming is disabled, you can still perform data
exchange with a Wi-Fi connection (refer to “6.1.2 Wi-Fi”).
To set preferred network mode
• Touch Settings > Network & internet > Cellular network >
Preferred network type.
6�1�2 Wi-Fi
You can connect to the internet when your phone is within range of
a wireless network. Wi-Fi can be used on your phone even without
a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Touch Settings > Network & internet > Wi-Fi.
• Turn on
.
• Once Wi-Fi is turned on, detected Wi-Fi networks are listed.
• Touch a Wi-Fi network to connect to it. If the network you
selected is secured, you are required to enter a password or
other credentials (you may need to contact the network carrier for
details). When finished, touch CONNECT.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to
your preference.
• Touch Settings > Network & internet > Wi-Fi > Add network.