TCL 43P725 User Manual

6
Chapter 2 Getting Started
Switching On
Follow the instructions on this page on how to switch on your TV set
and the remote control before going on to following pages describing
how to use the channel set-up procedure.
1.
Insert two AAA batteries in the remote control.
Precautions on using batteries:
- Only use the battery types specied.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat such as sunshine,
re or the like, throw them in a re, recharge them or try to open
them, as this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using
it for a long period of time.
- Attention should be drawn to the environmental aspects of battery
disposal.
2.
Connect the power cable FIRST to the television, THEN to a mains
socket. (
Note
:
If the power cable is connected to the television,
please only connect the power cable to the mains socket.
)
Your TV set should only be connected to an AC supply. It must not
be connected to a DC supply. If the plug is detached from the ca-
ble, do not, under any circumstances, connect it to a mains socket,
as there is a risk of electric shock.
Note
:
The gures are for representation only, the location of power
socket of the television may dier depending on the model.
3.
Connect an outside aerial to the
Antenna/Cable input
socket at
the back of the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for
connecting an external aerial or other equipment tted.
Notes
:
- If you want to receive the signal from your cable or cable box,
please connect a coaxial cable to the
Antenna/Cable i
nput socket
at the back of the TV set.
- If you want to receive the signal from your satellite receiver, please
connect a coaxial cable to the
Satellite input
socket at the back of
the TV set.
4.
When powered on, the TV will be turned on directly or be in
standby mode.
If the power indicator lights up, the TV set is in standby mode.
Press the button on the remote control or on the TV set to turn
on the TV.
Switching Off
• To put the TV set into standby mode, press the button on the
remote control. The TV set remains powered up, but with low
energy consumption.
• To switch o󰀨 the TV set, unplug the mains socket from the mains
outlet.

TCL 43P725 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	43 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Supported video modes	1080p, 1440p, 2160p
Contrast ratio (typical)	-
Display number of colors	1.073 billion colors
Display diagonal (metric)	109.2 cm
Screen format adjustments	4:3, 16:9
Supported graphics resolutions	1920 x 1080 (HD 1080), 2560 x 1440, 3840 x 2160
Motion interpolation technology	PQI (Picture Quality Index) 2200
Dynamic contrast ratio marketing name	Mega Contrast
Tuner type	Analog & digital
Auto channel search	Yes
Analog signal format system	NTSC, PAL, PAL BG, PAL DK, PAL I, PAL L, SECAM
Digital signal format system	DVB-C, DVB-S2, DVB-T2
Video apps	Amazon Prime Video, Disney+, Netflix, YouTube
Operating system version	Android R (11.0)
App distribution platform	Google Play
Operating system installed	Android
Hybrid Broadcast Broadband TV (HbbTV) version	2.0.2
Number of OSD languages	29
Audio decoders	Dolby Atmos, Dolby Digital AC4, Dolby TrueHD
RMS rated power	10 W
Number of speakers	2
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth profiles	A2DP, HID
Product color	Black
Mercury content	0 mg
Housing material	Plastic
Rollable display	No
Panel mounting interface	200 x 200 mm
Audio formats supported	MP3, WMA
Image formats supported	BMP, HEIF, JPG, PNS
Video formats supported	AVI, H.264, H.265, MKV, MP4, MPG, TS, VP9, WEBM, WMV
Subtitle formats supported	TXT
Picture processing technology	TCL IPQ 2.0 Engine
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
DVI-I ports quantity	1
USB 2.0 ports quantity	0
Common interface Plus (CI+) version	1.4
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (max)	115 W
Power consumption (standby)	0.28 W
Remote control type	RC802NU1+RC802V5
Package type	Box
Package depth	131 mm
Package width	1139 mm
Package height	650 mm
Package weight	9500 g
Repairability index	6.6

Weight and Dimensions

Stand width	800 mm
Depth (with stand)	230 mm
Width (with stand)	965 mm
Height (with stand)	622 mm
Weight (with stand)	7100 g
Depth (without stand)	87 mm
Height (without stand)	577 mm
Weight (without stand)	7000 g