L2 Repair Document TCL Communication Ltd.
ONE TOUCH 6055K/P/Y/B/H Level 2 Repair Document
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
4) PCBA with liquid or mildew.
2. PCBA label must be retained on the PCBA. Clean and intact IMEI label should be retained on the
PCBA.
IMEI label PCBA label
Note:
Ⅰ. Please remove the IMEI label if it is dirty, corrugated or broken, and then clean the PCBA and
make sure there‟s no residuum before return it to L3;
Ⅱ. PCBA label must be retained on PCBA, no matter what the status (even it is dirty, corrugated or
broken) it is.