TCL Alcatel Idol4 - Page 7

L2 Repair Document TCL Communication Ltd.
Rev.
ONE TOUCH 6055K/P/Y/B/H Level 2 Repair Document
Page
1.0
7/61
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
with dedicated SIM card. Use the correct SIM card.
6) Enter the phone code if necessary.
7) Enter auto test in power off mode:
8) Press *#458# in dial screen and then you will see the interface displaying the SW version.
Select “Auto” to start the auto test, or select “MANU” to do the MMI test manually.
If one of the test failed during “Auto” test mode, it will ask you “Restart?”, press “YES” to restart the
auto test from the first one and “NO” to exit the auto test, while “NEXT” to continue the auto test.
 Traceability
I. You can get some information such as IMEI, CU-REF, PTM, Date Code, etc.
II. Press “Pass” to continue.
 SMARTPA CAL
I. It will running the test automatically and show “TOP OK; BOTTOM OK; SmartPA Test
PASS” if it functions well;
II. Press “PASS” to continue.
 SpeakBox
I. It will run the test automatically and show “TOP OK;BUTTOM OK”; SpeakerBox Test
PASS if it functions well
II. Press ”Pass” to continue;
 Raw Data
I. It will running the test automatically, don‟t touch the screen during test and it will show
“Pass” if it functions well;
II. Press “PASS” to continue.
 Touch Panel
I. “Please draw on the yellow area” according to instructions;
II. Press “Pass” to continue.
 LCD
I. You will see the LCD display three colors: RED, GREEN and BLUE if it functions well;
II. Press “Pass” to continue;
III. You will see the LCD displays grey level if it functions well;