27
4
Use your Sound Bar
system
Use your Sound Bar with the top panel
or remote control
1
Make sure the Sound Bar is properly connected to the
power supply and sources.
2
Press on the top panel of your Sound Bar main unit or
remote control to power on the Sound Bar.
3
Press at the top panel of your Sound Bar main unit or
remote control to switch to the correct source.
LED behaviors under dierent source modes
LED indicators Source mode
The red LED is on solidly. in standby mode
The purple LED is on solidly. in HDMI ARC mode
The green LED is on solidly. in AUX mode
The blue LED is on solidly. in Bluetooth mode
TheblueLEDashesslowly. ready to pair
TheblueLEDashesslowly. pairing in progress
To Next Page
Loading...
Need help?
General
