29
Manual pairing
1
Make sure the Sound Bar and wireless subwoofer are
properly connected to the power supply.
2
Press PAIR at the back of the wireless subwoofer until
theblueLEDonthesubwooferashesslowly.
The wireless subwoofer is ready to pair.
3
Press on the top panel of your Sound Bar main unit
or the remote control to power on your Sound Bar main
unit.
The Sound Bar and wireless subwoofer will pair
automatically.
Pairing is successful. The blue LED remains on
solidly.
Note
• If the blue LED at the back of the subwoofer still
ashesafterpairing,itmeanspairingisnotsuccessful.
Disconnect the AC power cord from the wireless
subwoofer and then connect again after 3 minutes.
Then repeat steps 1 to 3.
To Next Page
Loading...
Need help?
General
