25
4 Use your Sound Bar
system
Use your Sound Bar with the top panel
or remote control
1
Make sure the Sound Bar is properly connected to the
power supply and sources.
2
Press at the top panel of your Sound Bar main unit or
remote control to switch to the correct source.
The Sound Bar will pair with the subwoofer automatically.
The amber LED will flash when pairing is in progress.
The amber LED will remain on solidly when pairing is
successful.
If you have devices more than one to be connected, please
connect the next one after connecting the previous one
successfuly.
To Next Page
Loading...
Need help?
General
