r,
Operate Washing Machine
■
Control panel
* The following illustration is a simple example
of
the
model
control
panel.
The illustration is
for
reference
only. Please refer to
the
actual effect.
01
Cycle Selector
Turn the dial
to
select a cycle.
02
Display
The
display
shows
current cycle information and
estimated
time
remaining,
or
an
information code when a
problem
occurs.
Prss down to
select
drying mode.
Continuous
press
this button, can be in the
"Strong",
"Standard",
"Slight" and no drying function mode switch;
03 Dry
Slight
- Clothes that need to be dried
after
the
drying
process;
Standard - Perform drying procedures
for
general
clothing;
Strong - Clothes that is basically
ready
to
wear
after
the
drying
process.
Press to select
the
rinsing times.
04 Rinse
Available rinsing times depends
on
the cycle.
The selected rinsing times will be displayed on
the
display.
Press to
change
the water temperature
for
the
current
cycle.
05 Temp.
Available temperature range depends on
the
cycle.
The selected temperature will be displayed
on
the
display.
Press to
change
the spinning speed
for
the
current
cycle.
06 Speed
Available spin speed depends
on
the cycle.
The selected spin speed will be displayed on the display.
Press to start
or
pause operation.
Press the button once to start a cycle.
07 Start/Pause
C>II
To
pause operation, press the button again.
You
may
change
the cycle settings and options.
To
resume paused operation, press
the
button again.
The knob indicates to rotate to the "On/Off"
program
to close
08 Power
CD
the machine.
When
the
machine
is off, turn the knob left/right to
start
the machine.
To Next Page
Loading...
