Operate Washing Machine
Delay(9
You
can set
the
washing
machine to finish yo
urwash
automatically at a later
time, choosing a delay
of
between 3 to 24 hours (in 1
hour
increments). The
hour displayed indicated
the
time the wash will finish.
1.
Select a cycle. Then change the cycle settings
if
necessary.
2. Press
Rinse(+) and Temp.(-) repeatedly until a desired end time is set.
3.
Press Start I Pause
C>II.
The corresponding indicator turns on with the
clock
running.
4.
To
cancel the Delay, Turn the knob to restart
the
washing
machine.
Real-life case
You
want to finish a two-hour course 3 hours
later
from now. For this, you
add the Delay option to the current cycle with
the
3-hour
setting, and press
Start I Pause
C>II
at
2:00
p.m.
Then,
what
happens?
The
washing machine
starts operating
at
3:00 p.m., and ends
at
5:00 p.m.
Steam Wash Icon G
If this icon is always bright, it means the Steam Wash function is enabled.
Due to the different configuration
of
models,
some
models do not have this
configuration, please refer to the actual model.
0 lld
Lock@
To
prevent
accidents
by children, Child Lock locks all buttons except for
Power
CD.
•
To
activate
or
deactivate the Child Lock function, press and hold Dry and
Rinse simultaneously for 3 seconds.
When Child Lock is activated, the
indicator@
lights up.
Aiarm
'
Off
tS,
You
can turn on
or
off
the sound
of
the cycle
selector
and all buttons.
• To turn on
or
off
the sound, press and hold Temp. and Speed
simultaneously
for
3 seconds.
,
obr~ock
1
QJ
When the
door
is not closed or locked normally,
the
icon is not bright; Lock
the door correctly, the icon is always bright.
Reload
~35
Long press the
Start/
Pause
C>II
button
for
3 seconds.
After
the lock is
unlocked,
the
function
of
adding clothes in the
middle
can be started.
To Next Page
Loading...
